| GNIS1443 |
Instrument Set for intraHEAL Proximal Hip Stabilizing Nail |
|
| GNIS1443.01 |
Handle |
1 |
| GNIS1443.02 |
Proximal Guide Rod 130° |
1 |
| GNIS1443.03 |
Distal Guide Rod - 180 / 200 / 220 mm |
1 |
| GNIS1443.04 |
Guide Rod Wheel |
2 |
| GNIS1443.05 |
Guide Wire Holder |
1 |
| GNIS1443.06 |
Distal Locking Protection Sleeve , Drill Sleeve & Trocar |
1 |
| GNIS1443.07 |
Distal Locking Protection Sleeve & Drill Sleeve |
1 |
| GNIS1443.08 |
Reduction Rod / Medullary Tube |
1 |
| GNIS1443.09 |
Drill Bit, 5.0 mm x 300 mm |
2 |
| GNIS1443.10 |
Drill Bit, 5.0 mm with Limitation |
1 |
| GNIS1443.11 |
Wrench for Limitation (Allen Key) |
1 |
| GNIS1443.12 |
Depth Gauge |
1 |
| GNIS1443.13 |
Distal Locking Screw Driver 5.0 mm |
1 |
| GNIS1443.14 |
Set Screw Driver |
1 |
| GNIS1443.15 |
End Cap Screw Driver 3.5 mm |
1 |
| GNIS1443.16 |
Sliding Hammer |
1 |
| GNIS1443.17 |
T-shaped Connect Wrench (ball Tip) |
1 |
| GNIS1443.17a |
Small T Shaped connect wrench |
1 |
| GNIS1443.18 |
Nail Extraction Rod |
1 |
| GNIS1443.19 |
Ruler |
1 |
| GNIS1443.20 |
Protect Sleeve |
1 |
| GNIS1443.21 |
Guide Pin Sleeve 3.0 mm |
1 |
| GNIS1443.22 |
Proximal Cortical Reamer |
1 |
| GNIS1443.23 |
Proximal Cannulated Drill Bit |
1 |
| GNIS1443.24 |
Proximal Cannulated Drill Bit With Limitation |
1 |
| GNIS1443.25 |
Quick Coupling Connector |
1 |
| GNIS1443.26 |
Guide Wire Olive |
1 |
| GNIS1443.26a |
Guide Wire Plain |
|
| GNIS1443.27 |
Flexible Reamer with Fixed Head (9 mm - 13 mm) |
5 |
| GNIS1443.28 |
Soft-Tissue Protecting Pad |
1 |
| GNIS1443.29 |
Reamer Presser |
1 |
| GNIS1443.30 |
Main Nail Connector |
1 |
| GNIS1443.31 |
Main Nail Connect Impactor |
1 |
| GNIS1443.32 |
Cannulated Bone Awl |
1 |
| GNIS1443.33 |
Insertion Bolt |
2 |
| GNIS1443.34 |
Open Spanner |
1 |
| GNIS1443.35 |
Hammer |
1 |
| GNIS1443.36 |
Proximal Nail Sleeve |
1 |
| GNIS1443.37 |
Compression Nut |
1 |
| GNIS1443.38 |
Cephalic Nail Sleeve |
1 |
| GNIS1443.39 |
Cephalic Nail Trocar |
1 |
| GNIS1443.40 |
Guide Wire for Cephalic Screw |
3 |
| GNIS1443.41 |
Depth Gauge For Cephalic Screw |
1 |
| GNIS1443.42 |
Locking Screwdriver For Cephalic Screw T-Type |
1 |
| GNIS1443.43 |
Locking Rod (Left / Right) |
1 |
| GNIS1443.44 |
Locking wheel 1 |
1 |
| GNIS1443.45 |
Locking wheel 2 |
1 |
| GNIS1443.46 |
Locking wheel 3 |
1 |
| GNIS1443.47 |
Distal Locking Jig for Long Nail |
1 |
| GNIS1443.48 |
Flat Drill Bit |
1 |
| GNIS1443.49 |
AP Stablizier |
1 |
| GNIS1443.50 |
Positioning Block |
1 |
| GNIS1443.51 |
Protection Sleeve with Trocar for AP Stablizer |
1 |
| GNIS1443.52 |
Drill sleeve with Drill bit for AP stablizer |
1 |
| GNIS1443.53 |
AP Stablizier with T-Type |
1 |
| GNIS1443.54 |
Aluminium Graphic Case |
1 |
